IFHS-M6-25
Ingress Capable Flush-Head Studs – Types IFH, IFHA, IFHS, IFHP
IFHS-M6-25
Ingress Capable Flush-Head Studs – Types IFH, IFHA, IFHS, IFHP
IFH™ self clinching studs allow for maximum material flow into the stud undercut to create a water-tight seal. Tighter tolerances and process controls produce a consistent reliable ingress capable result every time.
- Meets ISO:20653-2014 ingress protection levels
- Ingress repellent capability, meeting IPX7 and IPX9K IP ratings
- No rubber gasket or sealants needed
- Testing completed in CR4 steel, 6082-T6 aluminum, and 304 stainless steel
Specifications
- Thread Code
- M6
- Thread Size
- M6 x 1.0
- Fastener Material
- 300 Series Stainless Steel
- Material Code
- IFHS
- For Use in Sheet Hardness
- HRB 70/HB 125 or Less
- Length Code
- 25
- Product Category
- Ingress Capable Flush-Head Studs – Types IFH, IFHA, IFHS, IFHP
- CAD Supplier
- PennEngineering® (PEM®)
- CAD URL 3D
- https://catalog.pemnet.com/cadviewer/ThreeDim?sn=ifhs-m6-25-1&plpVer=1039
- H 0.4_mm
- 8.2mm
- Hole Size in Sheet +0.08_mm
- 6mm
- Length L_mm
- 25mm
- Max. Hole in Attached Parts_mm
- 6mm
- Min. Dist. Hole C/L to Edge_mm
- 7.9mm
- Min. Sheet Thickness_mm
- 1.6mm
- S Max._mm
- 3mm
Installation & Performance Data
| TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (N•m) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | PULL THRU (N) |
|---|---|---|---|---|---|---|---|---|
| IFHS | M6 | 5.7 | 2.4 mm Aluminum | 28 | 28.9 | 1660 | 7.3 | 9090 |
| IFHS | M6 | 6.7 | 2.2 mm Steel | 46 | 44.5 | 2560 | 10.1 | 10600 |
Inventory
| Distributor | Quantity | Contact | Phone | Address | Locations |
|---|