TKA-10-100

microPEM® TackSert™ Type TK™ Pins

TKA-10-100

microPEM® TackSert™ Type TK™ Pins

For attachment of thin sheets to plastics, common casting materials and other similar base materials. Also available in micro sizes, which are ideal for compact electronics.

Features and Benefits

Secure sheets to common magnesium die casting materials such as AZ91D. Also appropriate for attaching panels to plastics such as ABS.
Alternative to screws, eliminating the need to tap or use threaded inserts.
Tapered tip for easier alignment into base panel.
Top sheet can be any material.
Low-profile head.
Simple, press-in installation. Does not require heat or ultrasonics.
Can be installed automatically.

Request Samples

Length Code: 100
Product Category: TackSert® Pins
Thread Type: micro PEM® Tacksert™ Inserts
Application Type: Automotive Electronics, Consumer Electronics
Base Panel Hole Size + .003_in: 0.039in
Base Panel Hole Size +0.05_mm: 1mm
Base Panel Material: Castings, Plastic
Brand: microPEM
Fastener Characteristics: Micro
Finish Type: Plain
H ± 0.08_mm: 1.8mm
Industry: Automotive Electronics, Consumer Electronics
Installation Equipment/Method: C-Frame Manual Feed
L ± .002_in: 0.039in
L ± 0.06_mm: 1mm
PEM Product Family: MPF
Product Type: Pins
Technology Type: Broaching
Top Sheet Hole Size ±0.12mm/ ±.005in_in: 0.051in
Top Sheet Hole Size ±0.12mm/ ±.005in_mm: 1.3mm
T ± .003_in: 0.011in
T ± 0.08_mm: 0.27mm

Base Panel Hole Size Code: 10
H ± .008_in: 0.071in
C Max._in: 0.047in
C Max._mm: 1.2mm
Top Sheet Thickness Max._in: 0.008in
Top Sheet Thickness Max._mm: 0.2mm

mpf-cds-fasteners-metric

TYPE	TEST PIN MATERIAL	INSTALLATION (kN)	PULL-OFF (N)	CLAMP LOAD (N)
CDS-100	6061-T6 Aluminum	0.33	18.1	7

mpf-mpp-pins-metric

TYPE	PIN DIAMETER CODE	TEST SHEET THICKNESS	INSTALLATION (kN)	PUSHOUT (N)
MPP	1MM	0.5mm Stainless Steel HRB 88	10	320
MPP	1.5MM	0.5mm Stainless Steel HRB 88	12	760
MPP	2MM	0.5mm Stainless Steel HRB 88	18	860

mpf-ms04-standoffs-metric

TYPE	THREAD CODE	MAX. REC. TIGHTENING TORQUE FOR MATING SCREW (N•m))	SHEET THICKNESS (mm)	TEST SHEET MATERIAL	INSTALLATION (kN)	PUSHOUT (N)	TORQUE-OUT (N•m)	PULL-THRU (N)
MSO4	M1	0.019	0.3	300 Series Stainless Steel	11.1	150	0.15	350
MSO4	M1	0.019	0.43	300 Series Stainless Steel	11.1	200	0.25	350
MSO4	M1.2	0.036	0.3	300 Series Stainless Steel	11.1	150	0.15	350
MSO4	M1.2	0.036	0.43	300 Series Stainless Steel	11.1	200	0.25	350
MSO4	M1.4	0.057	0.3	300 Series Stainless Steel	11.1	150	0.15	350
MSO4	M1.4	0.057	0.43	300 Series Stainless Steel	11.1	200	0.25	350
MSO4	M1.6	0.084	0.3	300 Series Stainless Steel	11.1	150	0.15	350
MSO4	M1.6	0.084	0.43	300 Series Stainless Steel	11.1	200	0.25	350
MSO4	M2	0.175	0.3	300 Series Stainless Steel	11.1	150	0.25	500
MSO4	M2	0.175	0.43	300 Series Stainless Steel	11.1	200	0.3	500

mpf-ms04-standoffs-unified

TYPE	THREAD CODE	MAX. REC. TIGHTENING TORQUE FOR MATING SCREW (in. lbs.)	SHEET THICKNESS (in.)	TEST SHEET MATERIAL	INSTALLATION (lbs.)	PUSHOUT (lbs.)	TORQUE-OUT (in. lbs.)	PULL-THRU (lbs.)
MSO4	080	0.65	0.013	300 Series Stainless Steel	2500	33	1.3	78
MSO4	080	.65	0.017	300 Series Stainless Steel	2500	45	2.2	78
MSO4	256	1.3	0.013	300 Series Stainless Steel	2500	33	2.2	110
MSO4	256	1.3	0.017	300 Series Stainless Steel	2500	45	2.6	110

mpf-msia-msib-inserts-metric

TYPE	THREAD CODE	LENGTH CODE	TEST SHEET THICKNESS & MATERIAL	PULLOUT (N)	TORQUE-OUT (N•cm)
MSIA/MSIB	M1	100	ABS	50	3.5
MSIA/MSIB	M1	250	ABS	150	10
MSIA/MSIB	M1.2	100	ABS	50	3.5
MSIA/MSIB	M1.2	250	ABS	150	10
MSIA/MSIB	M1.4	150	ABS	100	15
MSIA/MSIB	M1.4	300	ABS	330	30
MSIA/MSIB	M1.6	150	ABS	100	15
MSIA/MSIB	M1.6	300	ABS	330	30
MSIA/MSIB	M2	300	ABS	335	35
MSIA/MSIB	M2	400	ABS	470	40
MSIA/MSIB	M1	100	Polycarbonate	50	4.5
MSIA/MSIB	M1	250	Polycarbonate	200	12
MSIA/MSIB	M1.2	100	Polycarbonate	50	4.5
MSIA/MSIB	M1.2	250	Polycarbonate	200	12
MSIA/MSIB	M1.4	150	Polycarbonate	140	15
MSIA/MSIB	M1.4	300	Polycarbonate	400	30
MSIA/MSIB	M1.6	150	Polycarbonate	140	15
MSIA/MSIB	M1.6	300	Polycarbonate	400	30
MSIA/MSIB	M2	300	Polycarbonate	410	33
MSIA/MSIB	M2	400	Polycarbonate	595	35

mpf-msofs-standoffs-metric

TYPE	THREAD CODE	MAX. REC. TIGHTENING TORQUE FOR MATING SCREW (N•m)	TEST SHEET THICKNESS & MATERIAL	INSTALLATION (kN)	PUSHOUT (N)	TORQUE-OUT (N•m)
MSOFS	M1	0.019	0.2 mm 300 Series Stainless Steel	6.67	311	0.146
MSOFS	M1.2	0.036	0.2 mm 300 Series Stainless Steel	6.67	311	0.146
MSOFS	M1.4	0.057	0.2 mm 300 Series Stainless Steel	6.67	311	0.146
MSOFS	M1.6	0.084	0.2 mm 300 Series Stainless Steel	8	406	0.146
MSOFS	M2	0.175	0.2 mm 300 Series Stainless Steel	8	406	0.146

mpf-msofs-standoffs-unified

TYPE	THREAD CODE	MAX. REC. TIGHTENING TORQUE FOR MATING SCREW (in. lbs.)	TEST SHEET THICKNESS & MATERIAL	INSTALLATION (lbs.)	PUSHOUT (lbs.)	TORQUE-OUT (in. lbs.)
MSOFS	080	0.65	.008" 300 Series Stainless Steel	1500	69.8	1.29
MSOFS	256	1.3	.008" 300 Series Stainless Steel	1800	91.2	1.29

mpf-smtso-fasteners-metric

TYPE	SHEET THICKNESS & MATERIAL	PUSHOUT (N)	TORQUE-OUT (N•m)
SMTSO-080	.062" Single Layer RF-4	378.7	0.56
SMTSO-M1	.062" Single Layer RF-4	378.7	0.56
SMTSO-M1.2	.062" Single Layer RF-4	378.7	0.56
SMTSO-M1.4	.062" Single Layer RF-4	378.7	0.56
SMTSO-M1.6	.062" Single Layer RF-4	378.7	0.56

mpf-smtso-fasteners-unified

TYPE	SHEET THICKNESS & MATERIAL	PUSHOUT (lbs.)	TORQUE-OUT (in. lbs.)
SMTSO-080	.062" Single Layer RF-4	85.1	4.94
SMTSO-M1	.062" Single Layer RF-4	85.1	4.94
SMTSO-M1.2	.062" Single Layer RF-4	85.1	4.94
SMTSO-M1.4	.062" Single Layer RF-4	85.1	4.94
SMTSO-M1.6	.062" Single Layer RF-4	85.1	4.94

mpf-t4-fasteners-metric

TYPE	SHEET MATERIAL	INSTALLATION (N)	PULLOUT (N)
T4-10-025	300 Series Stainless Steel	2020	200
T4-10-050	300 Series Stainless Steel	2020	200

mpf-t4-fasteners-unified

TYPE	SHEET MATERIAL	INSTALLATION (lbs.)	PULLOUT (lbs.)
T4-10-025	300 Series Stainless Steel	455	45
T4-10-050	300 Series Stainless Steel	455	45

mpf-ta-fasteners-metric

TYPE	SHEET MATERIAL	INSTALLATION (kN)	PULLOUT (N)
TA-10-025	5052-H34 Aluminum	820	80
TA-10-050	5052-H34 Aluminum	820	80
TA-10-075	5052-H34 Aluminum	820	80

mpf-ta-fasteners-unified

TYPE	SHEET MATERIAL	INSTALLATION (lbs.)	PULLOUT (lbs.)
TA-10-025	5052-H34 Aluminum	185	18
TA-10-050	5052-H34 Aluminum	185	18
TA-10-075	5052-H34 Aluminum	185	18

mpf-tfa-fasteners-metric

TYPE	SHEET MATERIAL	INSTALLATION (N)	PULLOUT (N)
TFA-10-025	5052-H34 Aluminum	450	40
TFA-10-035	5052-H34 Aluminum	450	40
TFA-10-045	5052-H34 Aluminum	450	40
TFA-10-055	5052-H34 Aluminum	450	40

mpf-tfa-fasteners-unified

TYPE	SHEET MATERIAL	INSTALLATION (lbs.)	PULLOUT (lbs.)
TFA-10-025	5052-H34 Aluminum	101	9
TFA-10-035	5052-H34 Aluminum	101	9
TFA-10-045	5052-H34 Aluminum	101	9
TFA-10-055	5052-H34 Aluminum	101	9

mpf-tka-tk4-pins-metric

TYPE	TEST BASE PANEL MATERIAL	DEPTH OF ENGAGEMENT (mm)	INSTALLATION (N)	PULLOUT (N)
TKA-10	ABS	0.8	133	9
TKA-10	ABS	1	133	14
TKA-10	ABS	1.3	133	19
TKA-10	ABS	1.5	178	24
TKA-10	ABS	1.8	178	31
TKA-10	ABS	2	222	35
TKA-10	ABS	2.3	222	41
TKA-10	ABS	2.8	245	53
TKA-10	Polycarbonate	0.8	222	25
TKA-10	Polycarbonate	1	267	37
TKA-10	Polycarbonate	1.3	267	53
TKA-10	Polycarbonate	1.5	311	68
TKA-10	Polycarbonate	1.8	334	86
TKA-10	Polycarbonate	2	378	98
TKA-10	Polycarbonate	2.3	400	113
TK4-10	Polycarbonate	2.8	423	146
TK4-10	Magnesium Casting (AZ91D)	0.8	445	29
TK4-10	Magnesium Casting (AZ91D)	1	489	43
TK4-10	Magnesium Casting (AZ91D)	1.3	534	61
TK4-10	Magnesium Casting (AZ91D)	1.5	578	78
TK4-10	Magnesium Casting (AZ91D)	1.8	623	99
TK4-10	Magnesium Casting (AZ91D)	2	667	113
TK4-10	Magnesium Casting (AZ91D)	2.3	712	131
TK4-10	Magnesium Casting (AZ91D)	2.8	801	169

mpf-tka-tk4-pins-unified

TYPE	TEST BASE PANEL MATERIAL	DEPTH OF ENGAGEMENT (in.)	INSTALLATION (lbs.)	PULLOUT (lbs.)
TKA-10	ABS	0.0315	30	2
TKA-10	ABS	0.0394	30	3
TKA-10	ABS	0.0492	30	4
TKA-10	ABS	0.0590	40	6
TKA-10	ABS	0.0708	40	7
TKA-10	ABS	0.0787	50	8
TKA-10	ABS	0.0886	50	9
TKA-10	ABS	0.1102	55	12
TKA-10	Polycarbonate	0.0315	50	6
TKA-10	Polycarbonate	0.0394	60	8
TKA-10	Polycarbonate	0.0492	60	12
TKA-10	Polycarbonate	0.0590	70	15
TKA-10	Polycarbonate	0.0708	75	19
TKA-10	Polycarbonate	0.0787	85	22
TKA-10	Polycarbonate	0.0886	90	25
TK4-10	Polycarbonate	0.1102	95	33
TK4-10	Magnesium Casting (AZ91D)	0.0315	100	7
TK4-10	Magnesium Casting (AZ91D)	0.0394	110	10
TK4-10	Magnesium Casting (AZ91D)	0.0492	120	14
TK4-10	Magnesium Casting (AZ91D)	0.0590	130	18
TK4-10	Magnesium Casting (AZ91D)	0.0708	140	22
TK4-10	Magnesium Casting (AZ91D)	0.0787	150	25
TK4-10	Magnesium Casting (AZ91D)	0.0886	160	29
TK4-10	Magnesium Casting (AZ91D)	0.1102	180	38

mpf-ts4-fasteners-metric

TYPE	TESTED TOP SHEET THICKNESS	SHEET MATERIAL	INSTALLATION (N)	PULLOUT (N)	TORQUE TO REMOVE (N•cm)
TS4-10-025	0.254 mm / .01"	5052-H34 Aluminum HRB 63 / HB 114	556	80	3.3
TS4-10-050	0.533 mm / .021"	5052-H34 Aluminum HRB 63 / HB 114	556	80	3.3
TS4-10-025	0.254 mm / .01"	304 Stainless Steel HRB 89/HB 187	1423	125	4.6
TS4-10-050	0.533 mm / .021"	304 Stainless Steel HRB 89/HB 187	1423	125	4.6

mpf-ts4-fasteners-unified

TYPE	TESTED TOP SHEET THICKNESS	SHEET MATERIAL	INSTALLATION (lbs.)	PULLOUT (lbs.)	TORQUE TO REMOVE (in. oz.)
TS4-10-025	0.254 mm / .01"	5052-H34 Aluminum HRB 63 / HB 114	125	18	4.7
TS4-10-050	0.533 mm / .021"	5052-H34 Aluminum HRB 63 / HB 114	125	18	4.7
TS4-10-025	0.254 mm / .01"	304 Stainless Steel HRB 89/HB 187	320	28	6.5
TS4-10-050	0.533 mm / .021"	304 Stainless Steel HRB 89/HB 187	320	28	6.5

Distributor	Quantity	Contact	Phone	Address	Locations

TKA-10-100

TKA-10-100

全站搜索

您想了解哪些？

TKA-10-100

TKA-10-100

Specifications

Installation & Performance Data

Inventory

全站搜索

您想了解哪些？