FH-094-5ZC

Self-Clinching Pins – Type FH, FHS, FHA

FH-094-5ZC

Self-Clinching Pins – Type FH, FHS, FHA

PEM® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove – creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.

FH (flush-head) studs are available in aluminum, steel, or stainless steel . They are also available unthreaded on special order.- Flush-head for sheet thickness of .040” and greater.

Type FH is recommended for use in steel or aluminum sheets HRB (Rockwell “B” Scale) 80 or less and HB (Hardness Brinell) 150 or less.
Type FHS is recommended for use in steel or aluminum sheets HRB (Rockwell “B” Scale) 70 or less and HB (Hardness Brinell) 125 or less.
Type FHA is recommended for use in aluminum sheets HRB (Rockwell “B” Scale) 50 or less and HB (Hardness Brinell) 82 or less.

Request Samples

Datasheet

Thread Code: 094
Fastener Material: Hardened Carbon Steel
Standard Finish: SC1 (5µm), Type II, yellow, Zinc plated per ASTM B633
For Use in Sheet Hardness: HRB 80 / HB 150 or less
Product Category: Self-Clinching Pins – Type FH, FHS, FHA – Unified
Thread Type: Unthreaded
PEM Product Family: FH
Product Type: Pins

H ± .015_in: 0.18in
Hole Size in Sheet +.003 – .000_in: in
L Len Pm 015in Or 4mm: 0.312in
Min. Dist. Hole C/L to Edge_in: 0.22in
P ± 0.05mm/±.002in_in: 0.094in
S Max._in: 0.085in

fh-fh-fhs-studs-metric

TYPE	THREAD CODE	REC. NUT TIGHTENING TORQUE (N•m)	TEST SHEET THICKNESS & MATERIAL	SHEET HARDNESS HRB	INSTALLATION (kN)	PUSHOUT (N)	TORQUE-OUT (N•m)	PULL THRU (N)
FH	M2.5	0.78	1.6 mm Aluminum	29	8.9	465	1.0	2600
FHS	M2.5	0.48	1.6 mm Aluminum	29	11.6	465	0.8	1820
FH	M3	1.1	1.6 mm Aluminum	29	12.9	600	1.7	3150
FHS	M3	0.81	1.6 mm Aluminum	29	12.9	600	1.3	2570
FH	M3.5	1.6	1.6 mm Aluminum	29	15.6	800	1.7	3780
FHS	M3.5	1.3	1.6 mm Aluminum	29	15.6	800	1.7	3445
FH	M4	2.1	1.6 mm Aluminum	29	20	975	2.9	4448
FHS	M4	1.8	1.6 mm Aluminum	29	22.3	975	2.9	4180
FH	M5	3.1	1.6 mm Aluminum	29	24.5	1070	3.5	5170
FHS	M5	2.5	1.6 mm Aluminum	29	24.5	1070	3.5	4760
FH	M6	7.3	2.4 mm Aluminum	28	28.9	1660	7.3	10200
FHS	M6	5.7	2.4 mm Aluminum	28	28.9	1660	7.3	9090
FH	M8	10	2.4 mm Aluminum	28	29.8	1910	11.3	10500
FHS	M8	8	2.4 mm Aluminum	28	29.8	1910	11.3	9540
FH	M2.5	0.84	1.5 mm Steel	59	11.1	740	1.0	2800
FHS	M2.5	0.48	1.5 mm Steel	59	13.8	740	0.8	1820
FH	M3	1.4	1.5 mm Steel	59	14.7	820	1.7	3840
FHS	M3	0.77	1.5 mm Steel	59	14.7	820	1.3	2440
FH	M3.5	1.6	1.5 mm Steel	59	22.3	1335	2.8	3780
FHS	M3.5	1.3	1.5 mm Steel	59	22.3	1335	2.0	3445
FH	M4	2.7	1.5 mm Steel	59	28.9	1780	4.2	5650
FHS	M4	2	1.5 mm Steel	59	26.7	1780	2.9	4775
FH	M5	3.8	1.5 mm Steel	59	33.4	2000	6.5	6270
FHS	M5	3.2	1.5 mm Steel	59	32.5	2000	6.3	6000
FH	M6	8.1	2.2 mm Steel	46	44.5	2560	11.3	11300
FHS	M6	6.7	2.2 mm Steel	46	44.5	2560	10.1	10600
FH	M8	15	2.4 mm Steel	46	44.5	2890	19.2	15450
FHS	M8	11	2.4 mm Steel	46	49.8	2890	17.5	13630

fh-fh-fhs-studs-unified

TYPE	THREAD CODE	REC. NUT TIGHTENING TORQUE (in. lbs.)	TEST SHEET THICKNESS & MATERIAL	SHEET HARDNESS HRB	INSTALLATION (lbs.)	PUSHOUT (lbs.)	TORQUE-OUT (in. lbs.)	PULL THRU (lbs.)
FH	256	4.4	.062" Aluminum	29	2000	100	5	425
FHS	256	2.7	.062" Aluminum	29	2000	100	4.5	300
FH	440	8.7	.064" Aluminum	29	3800	170	10	650
FHS	440	5.9	.064" Aluminum	29	3200	170	8	500
FH	632	14	.064" Aluminum	29	3800	180	17	850
FHS	632	11	.064" Aluminum	29	3500	180	16	775
FH	832	20	.064" Aluminum	29	4800	220	28	1000
FHS	832	16	.064" Aluminum	29	4500	220	28	940
FH	024/032	28	.064" Aluminum	29	5500	270	30	1220
FHS	024/032	24	.064" Aluminum	29	5500	270	30	1220
FH	0420	69	.093" Aluminum	28	6500	310	65	2300
FHS	0420	55	.093" Aluminum	28	6500	310	65	2100
FH	0518	85	.093" Aluminum	28	6500	430	100	2260
FHS	0518	74	.093" Aluminum	28	6700	430	100	2260
FH	256	4.4	.060" Steel	59	2500	180	5	425
FHS	256	2.7	.060" Steel	59	2500	180	4.5	300
FH	440	8.7	.060" Steel	59	4300	275	10	650
FHS	440	5.9	.060" Steel	59	4700	275	8	500
FH	632	14	.060" Steel	59	4700	300	20	850
FHS	632	11	.060" Steel	59	5000	300	16	775
FH	832	25	.060" Steel	59	6800	375	40	1270
FHS	832	19	.060" Steel	59	5500	375	28	1130
FH	024/032	32	.060" Steel	59	7500	450	60	1410
FHS	024/032	28	.060" Steel	59	6800	450	50	1410
FH	0420	77	.088" Steel	46	9500	575	100	2550
FHS	0420	67	.088" Steel	46	10000	575	100	2550
FH	0518	130	.093" Steel	46	10000	650	175	3475
FHS	0518	102	.093" Steel	46	11200	650	175	3120

fh-fh4-studs-metric

TYPE	THREAD CODE	REC. NUT TIGHTENING TORQUE (N•m)	TEST SHEET THICKNESS & MATERIAL	SHEET HARDNESS HRB	INSTALLATION (kN)	PUSHOUT (N)	TORQUE-OUT (N•m)	PULL THRU (N)
FH4	M3	1.3	1.5 mm Stainless Steel	87	40	2220	1.8	3500
FH4	M4	3.8	1.5 mm Stainless Steel	86	50	3210	6.5	8000
FH4	M5	6	1.5 mm Stainless Steel	86	53	3560	10.7	10000
FH4	M6	11	1.6 mm Stainless Steel	88	100	4200	15.9	14900

fh-fh4-studs-unified

TYPE	THREAD CODE	REC. NUT TIGHTENING TORQUE (in. lbs.)	TEST SHEET THICKNESS & MATERIAL	SHEET HARDNESS HRB	INSTALLATION (lbs.)	PUSHOUT (lbs.)	TORQUE-OUT (in. lbs.)	PULL THRU (lbs.)
FH4	440	11	.060" Stainless Steel	87	9000	450	16	800
FH4	632	22	.060" Stainless Steel	87	9500	540	27	1350
FH4	832	35	.060" Stainless Steel	86	11200	780	58	1800
FH4	032	51	.060" Stainless Steel	86	12000	800	95	2250
FH4	0420	117	.062" Stainless Steel	88	23000	1600	156	3900

fh-fha-studs-metric

TYPE	THREAD CODE	REC. NUT TIGHTENING TORQUE (N•m)	TEST SHEET THICKNESS & MATERIAL	SHEET HARDNESS HR15T	INSTALLATION (kN)	PUSHOUT (N)	TORQUE-OUT (N•m)	PULL THRU (N)
FHA	M3	0.54	1.55 mm 5052-H34 Aluminum	74	10.7	575	0.5	1500
FHA	M4	0.96	1.55 mm 5052-H34 Aluminum	75	14.3	775	1.35	2000
FHA	M5	1.5	1.55 mm 5052-H34 Aluminum	75	15.2	900	2.6	2500
FHA	M6	3.2	1.6 mm 5052-H34 Aluminum	75	24.5	1500	5.3	4500

fh-fha-studs-unified

TYPE	THREAD CODE	REC. NUT TIGHTENING TORQUE (in. lbs.)	TEST SHEET THICKNESS & MATERIAL	SHEET HARDNESS HR15T	INSTALLATION (lbs.)	PUSHOUT (lbs.)	TORQUE-OUT (in. lbs.)	PULL THRU (lbs.)
FHA	440	3.6	.061" 5052-H34 Aluminum	75	2500	155	4	270
FHA	632	6.3	.061" 5052-H34 Aluminum	75	2600	180	8	380
FHA	832	9.8	.061" 5052-H34 Aluminum	73	3200	190	15	500
FHA	032	14	.061" 5052-H34 Aluminum	75	3200	220	28	600
FHA	0420	32	.062" 5052-H34 Aluminum	75	5500	300	55	1050

fh-fhl-fhls-studs-metric

TYPE	THREAD CODE	REC. NUT TIGHTENING TORQUE (N•m)	TEST SHEET THICKNESS & MATERIAL	SHEET HARDNESS HRB	INSTALLATION (kN)	PUSHOUT (N)	TORQUE-OUT (N•m)	PULL THRU (N)	PULL THRU TEST BUSHING HOLE SIZE (mm)
FHL, FHLS	M2.5	0.32	1.2 mm Aluminum	33	3.1	285	0.55	1200	3
FHL, FHLS	M3	0.41	1.2 mm Aluminum	33	4.4	285	0.65	1300	3.5
FHL, FHLS	M3.5	0.51	1.2 mm Aluminum	33	4.4	290	0.76	1400	4
FHL, FHLS	M4	0.65	1.2 mm Aluminum	33	5.3	365	1.1	1550	4.5
FHL, FHLS	M5	0.97	1.2 mm Aluminum	33	11.1	530	2.2	1850	5.5
FHL, FHLS	M2.5	0.59	1.1 mm Steel	54	5.3	450	1.1	2250	3
FHL, FHLS	M3	0.79	1.1 mm Steel	54	5.3	475	1.25	2500	3.5
FHL, FHLS	M3.5	1.03	1.1 mm Steel	54	6.6	500	1.75	2800	4
FHL, FHLS	M4	1.39	1.1 mm Steel	54	6.6	550	2.1	3300	4.5
FHL, FHLS	M5	1.97	1.1 mm Steel	54	20	1000	4.4	3750	5.5

fh-fhl-fhls-studs-unified

TYPE	THREAD CODE	REC. NUT TIGHTENING TORQUE (in. lbs.)	TEST SHEET THICKNESS & MATERIAL	SHEET HARDNESS HRB	INSTALLATION (lbs.)	PUSHOUT (lbs.)	TORQUE-OUT (in. lbs.)	PULL THRU (lbs.)	PULL THRU TEST BUSHING HOLE SIZE (in.)
FHL, FHLS	256	2.1	.047" Aluminum	33	700	55	4	230	.106
FHL, FHLS	440	3.5	.047" Aluminum	33	1000	60	5	300	.132
FHL, FHLS	632	4.7	.047" Aluminum	33	1000	65	6.5	325	.158
FHL, FHLS	832	6	.047" Aluminum	33	1200	80	9	350	.184
FHL, FHLS	032	7.9	.047" Aluminum	33	2500	115	18	395	.210
FHL, FHLS	256	3.8	.045" Steel	54	1200	85	8	425	.106
FHL, FHLS	440	6.8	.045" Steel	54	1200	105	11	580	.132
FHL, FHLS	632	9	.045" Steel	54	1500	110	15	650	.158
FHL, FHLS	832	13	.045" Steel	54	1500	125	18	740	.184
FHL, FHLS	032	16	.045" Steel	54	4500	210	38	800	.210

fh-fhp-studs-metric

TYPE	THREAD CODE	REC. NUT TIGHTENING TORQUE (N•m)	TEST SHEET THICKNESS & MATERIAL	SHEET HARDNESS HRB	INSTALLATION (kN)	PUSHOUT (N)	TORQUE-OUT (N•m)	PULL THRU (N)
FHP	M3	1.3	2 mm Stainless Steel	86	40	2500	1.6	3500
FHP	M4	2.9	1.14 mm Stainless Steel	86	50	3000	3.9	6000
FHP	M5	4.4	1.14 mm Stainless Steel	86	53	3560	7.35	7320

fh-fhp-studs-unified

TYPE	THREAD CODE	REC. NUT TIGHTENING TORQUE (in. lbs.)	TEST SHEET THICKNESS & MATERIAL	SHEET HARDNESS HRB	INSTALLATION (lbs.)	PUSHOUT (lbs.)	TORQUE-OUT (in. lbs.)	PULL THRU (lbs.)
FHP	440	8.1	.045" Stainless Steel	86	9000	520	10.6	605
FHP	632	16	.045" Stainless Steel	86	9500	670	19.5	940
FHP	832	28	.045" Stainless Steel	86	11200	785	37.5	1415
FHP	032	34	.045" Stainless Steel	86	12000	800	59.5	1500

fh-fhx-studs-metric

TYPE	THREAD CODE	TEST SHEET THICKNESS & MATERIAL	INSTALLATION (kN)	PUSHOUT (N)	TORQUE-OUT (N•m)
FHX	X5	1.1 mm Steel HRB 58 / HB 104	24.9	1519	4.7
FHX	X5	1.2 mm Aluminum HRB 44 / HB 66	19.2	1070	3.2
FHX	X6	1.6 mm Steel HRB 58 / HB 104	35.6	2964	13.3
FHX	X6	1.6 mm Aluminum HRB 44 / HB 66	29.4	1623	7

fh-hfe-studs-metric

TYPE	THREAD CODE	REC. NUT TIGHTENING TORQUE (N•m)	TEST SHEET THICKNESS & MATERIAL	SHEET HARDNESS HRB	INSTALLATION (kN)	PUSHOUT (N)	TORQUE-OUT (N•m)	TENSILE STRENGTH (kN)	PULL THRU (N)	PULL THRU TEST BUSHING HOLE SIZE (mm)
HFE	M5	5.8	1 mm Aluminum	27	37.7	690	8.1	12.8	9.7	7.4
HFE	M6	10	1 mm Aluminum	27	39	750	11.8	18.1	14.2	8.2
HFE	M8	24	1.5 mm Aluminum	22	42	1230	23.5	32.9	25	10.3
HFE	M5	6.4	1 mm Cold-rolled Steel	67	51.1	1350	8.1	12.8	10.6	7.4
HFE	M6	11	1 mm Cold-rolled Steel	67	60	1400	14.4	18.1	15.5	8.2
HFE	M8	26	1 mm Cold-rolled Steel	65	71.1	2400	33.9	32.9	27.5	10.3

fh-hfe-studs-unified

TYPE	THREAD CODE	REC. NUT TIGHTENING TORQUE (ft. lbs.)	TEST SHEET THICKNESS & MATERIAL	SHEET HARDNESS HRB	INSTALLATION (lbs.)	PUSHOUT (lbs.)	TORQUE-OUT (in. lbs.)	TENSILE STRENGTH (lbs.)	PULL THRU (lbs.)	TEST BUSHING HOLE SIZE FOR PULL THRU TESTS (in.)
HFE	032	3.6	.040" Aluminum	27	7500	170	60	2400	1900	.279
HFE	0420	8	.040" Aluminum	27	8000	180	120	3820	3200	.335
HFE	0518	19	.060" Aluminum	22	9000	275	240	6280	6000	.407
HFE	032	4.2	.040" Cold-rolled Steel	67	9500	300	60	2400	2200	.279
HFE	0420	9	.040" Cold-rolled Steel	67	13500	340	130	3820	3600	.335
HFE	0518	20	.060" Cold-rolled Steel	65	15500	575	290	6280	6280	.407

fh-hfg8-hf109-studs-metric

TYPE	THREAD CODE	REC. NUT TIGHTENING TORQUE (N•m)	TENSILE STRENTH (kN)	TEST SHEET THICKNESS & MATERIAL	SHEET HARDNESS HRB	INSTALLATION (kN)	PUSHOUT (N)	TORQUE-OUT (N•m)
HF109	M5	10	14.8	1.2 mm HSLA Steel	86.1	60.1	2084	9
HF109	M6	17	20.9	1.2 mm HSLA Steel	85.6	90	2454	15.6
HF109	M8	41	38.1	1.5 mm HSLA Steel	84	145	3026	38.4
HF109	M5	10	14.8	1 mm Cold-rolled Steel	45.3	43.2	978	9
HF109	M6	17	20.9	1 mm Cold-rolled Steel	45.5	60	1072	14.4
HF109	M8	41	38.1	1.5 mm Cold-rolled Steel	55	85	1992	37.7

fh-hfg8-hf109-studs-unified

TYPE	THREAD CODE	REC. NUT TIGHTENING TORQUE (ft. lbs.)	TENSILE STRENTH (lbs.)	TEST SHEET THICKNESS & MATERIAL	SHEET HARDNESS HRB	INSTALLATION (lbs.)	PUSHOUT (lbs.)	TORQUE-OUT (ft. lbs.)
HFG8	032	6.4	3000	.047" HSLA Steel	85.5	14000	483	6.2
HFG8	0420	13	4750	.047" HSLA Steel	85.7	21400	592	11.5
HFG8	0518	28	7850	.060" HSLA Steel	84.9	32600	667	25.6
HFG8	032	6.4	3000	0.040" Cold-rolled Steel	45.0	9900	249	5.9
HFG8	0420	13	4750	0.040" Cold-rolled Steel	45.0	14100	248	11.5
HFG8	0518	28	7850	0.040" Cold-rolled Steel	55.2	19100	447	25.2

fh-hfh-hfhs-hfhb-studs-metric

TYPE	THREAD CODE	REC. NUT TIGHTENING TORQUE (N•m)	TEST SHEET THICKNESS & MATERIAL	SHEET HARDNESS HRB	INSTALLATION (kN)	PUSHOUT (N)	TORQUE-OUT (N•m)	TENSILE STRENGTH (kN)
HFH	M5	7.7	1.5 mm Aluminum	15	13	800	5.4	12.8
HFH	M5	7.7	1.5 mm Steel	65	26	1500	7.6	12.8
HFHS	M5	3.8	1.62 mm Aluminum	35	12.4	800	5.4	7.3
HFHS	M5	3.8	1.47 mm Steel	54	21.7	1500	6.4	7.3
HFHB	M5	2.7	1.5 mm Copper CDA-110	28	15.6	1115	3.4	5.9
HFH	M6	13	1.5 mm Aluminum	43	29	1270	14	18.1
HFH	M6	13	1.5 mm Steel	59	33	1750	14	18.1
HFHS	M6	6.5	1.62 mm Aluminum	35	15.4	1270	11	10.3
HFHS	M6	6.5	1.6 mm Steel	45	24.6	1750	11	10.3
HFHB	M6	4.5	1.5 mm Copper CDA-110	28	25.3	1600	6.7	8.3
HFH	M8	32	2.3 mm Aluminum	39	35.6	1700	30	32.9
HFH	M8	32	2.3 mm Steel	58	44.5	2200	30	32.9
HFHS	M8	16	2.23 mm Aluminum	44	24.4	1700	20	18.8
HFHS	M8	16	2.48 mm Steel	43	37.8	2100	20	18.8
HFHB	M8	11	3.2 mm Copper CDA-110	32	33	2250	15.3	15.1
HFH	M10	63	2.3 mm Aluminum	39	53.3	2445	36	52.2
HFH	M10	63	2.3 mm Steel	58	71.2	3470	49	52.2
HFHS	M10	31	2.3 mm Aluminum	44	44.4	2445	36	29.9
HFHS	M10	31	2.3 mm Steel	44	57.7	3470	36	29.9
HFHB	M10	22	3.2 mm Copper CDA-110	32	53.3	2500	25	24

fh-hfh-hfhs-hfhb-studs-unified

TYPE	THREAD CODE	REC. NUT TIGHTENING TORQUE (ft. lbs.)	TEST SHEET THICKNESS & MATERIAL	SHEET HARDNESS HRB	INSTALLATION (lbs.)	PUSHOUT (lbs.)	TORQUE-OUT (in. lbs.)	TENSILE STRENGTH (lbs.)
HFH	032	4.6	.060" Aluminum	15	3000	180	4	2400
HFH	032	4.6	.060" Steel	65	6000	375	5	2400
HFHS	032	2.5	.050" Aluminum	38	3000	180	4	1500
HFHS	032	2.5	.058" Steel	52	4500	325	4	1500
HFHB	032	1.7	.061" Copper CDA-110	28	3400	150	2.9	1200
HFH	0420	9.6	.060" Aluminum	43	5500	285	11	3820
HFH	0420	9.6	.060" Steel	59	7000	480	11	3820
HFHS	0420	5.2	.064" Aluminum	32	4000	285	8	2385
HFHS	0420	5.2	.072" Steel	43	6500	480	8	2385
HFHB	0420	3.6	.061" Copper CDA-110	28	6000	380	5	1908
HFH	0518	20	.091" Aluminum	39	8000	380	22	6280
HFH	0518	20	.090" Steel	58	10000	590	22	6280
HFHS	0518	11	.087" Aluminum	41	5500	380	15	3930
HFHS	0518	11	.099" Steel	44	7500	590	15	3930
HFHB	0518	7	.126" Copper CDA-110	32	7500	500	11	3140
HFH	0616	35	.091" Aluminum	39	12000	550	25	9300
HFH	0616	35	.090" Steel	58	16000	780	36	9300
HFHS	0616	19	.123" Aluminum	44	10000	560	25	5810
HFHS	0616	19	.099" Steel	44	13000	780	25	5810
HFHB	0616	13	.126" Copper CDA-110	32	12000	560	18	4650

fh-hflh-studs-metric

TYPE	THREAD CODE	REC. NUT TIGHTENING TORQUE (N•m)	TEST SHEET THICKNESS & MATERIAL	SHEET HARDNESS HRB	INSTALLATION (kN)	PUSHOUT (N)	TORQUE-OUT (N•m)	TENSILE STRENGTH (kN)	PULL-THRU (kN)	TEST BUSHING HOLE SIZE FOR PULL THRU TESTS
HFLH	M5	6.4	1 mm HC500LA	89	51.1	1350	8.1	12.8	10.6	7.4
HFLH	M6	11	1 mm HC500LA	89	60	1400	14.4	18.1	15.5	8.2
HFLH	M8	26	1.5 mm HC500LA	91	71.1	2400	33.9	32.9	27.5	10.3

fh-hflh-studs-unified

TYPE	THREAD CODE	REC. NUT TIGHTENING TORQUE (ft. lbs.)	TEST SHEET THICKNESS & MATERIAL	SHEET HARDNESS HRB	INSTALLATION (lbs.)	PUSHOUT (lbs.)	TORQUE-OUT (in. lbs.)	TENSILE STRENGTH (lbs.)	PULL-THRU (lbs.)	TEST BUSHING HOLE SIZE FOR PULL THRU TESTS
HFLH	032	4.2	.040" HC500LA	89	9500	300	60	2400	2200	0.279
HFLH	0420	10	.040" HC500LA	89	13500	340	130	3820	3600	0.335
HFLH	0518	23	.060" HC500LA	91	16000	575	290	6280	6280	0.407

fh-sgpc-studs-metric

TYPE	THREAD CODE	REC. NUT TIGHTENING TORQUE (N•m)	TEST SHEET THICKNESS & MATERIAL	INSTALLATION (kN)	PUSHOUT (N)	TORQUE-OUT (N•m)	PULL-THRU (N)
SGPC	M2.5	0.67	Single Sheet of 1 mm 300 Series Stainless Steel	20.1	2546	0.86	2561
SGPC	M3	0.9	Single Sheet of 1 mm 300 Series Stainless Steel	21.8	2051	1.35	2851
SGPC	M4	2.5	Single Sheet of 1 mm 300 Series Stainless Steel	28.5	2396	2.66	4000
SGPC	M5	3.3	Single Sheet of 1 mm 300 Series Stainless Steel	35.6	3200	5.96	4284
SGPC	M6	3.3	Single Sheet of 1 mm 300 Series Stainless Steel	42.3	3262	9.19	6311

fh-sgpc-studs-unified

TYPE	THREAD CODE	REC. NUT TIGHTENING TORQUE (in. lbs.)	TEST SHEET THICKNESS & MATERIAL	INSTALLATION (lbs.)	PUSHOUT (lbs.)	TORQUE-OUT (in. lbs.)	PULL-THRU (lbs.)
SGPC	256	3.7	Single Sheet of .039" 300 Series Stainless Steel	4000	425	5.2	415
SGPC	440	6	Single Sheet of .039" 300 Series Stainless Steel	5000	450	8	512
SGPC	632	12	Single Sheet of .039" 300 Series Stainless Steel	5500	460	15.8	811
SGPC	832	20	Single Sheet of .039" 300 Series Stainless Steel	6500	480	29.3	1133
SGPC	032	25	Single Sheet of .039" 300 Series Stainless Steel	7300	545	42.8	1273
SGPC	0420	45	Single Sheet of .039" 300 Series Stainless Steel	10000	565	76.7	1721

fh-tfh-tfhs-studs-metric

TYPE	THREAD CODE	REC. NUT TIGHTENING TORQUE (N•m)	TEST SHEET THICKNESS & MATERIAL	SHEET HARDNESS HRB	INSTALLATION (kN)	PUSHOUT (N)	TORQUE-OUT (N•m)	PULL THRU (N)	PULL THRU TEST BUSHING HOLE SIZE (mm)
TFH	M3	1.1	0.65 mm Aluminum	42	5.8	370	0.72	3091	3.51
TFHS	M3	0.93	0.65 mm Aluminum	43	5.8	255	0.19	2962	3.51
TFH	M4	1.9	0.65 mm Aluminum	42	14.2	396	1.29	3963	4.5
TFHS	M4	1.7	0.65 mm Aluminum	40	9.8	391	1.83	4126	4.5
TFH	M5	2.8	0.64 mm Aluminum	42	3.2	499	1.71	4720	5.51
TFHS	M5	2.6	0.64 mm Aluminum	42	3.2	518	2.29	4977	5.51
TFH	M3	1.3	0.57 mm Steel	57	8	419	1.32	3477	3.51
TFHS	M3	0.94	0.57 mm Steel	57	6.7	394	0.84	2971	3.51
TFH	M4	2.1	0.57 mm Steel	57	17.8	453	1.69	4380	4.5
TFHS	M4	2	0.57 mm Steel	57	13.4	460	2.49	4701	4.5
TFH	M5	3.4	0.56 mm Steel	57	12.1	570	2.77	5654	5.51
TFHS	M5	2.8	0.57 mm Steel	57	12.9	582	2.9	5328	5.51

fh-tfh-tfhs-studs-unified

TYPE	THREAD CODE	REC. NUT TIGHTENING TORQUE (in. lbs.)	TEST SHEET THICKNESS & MATERIAL	SHEET HARDNESS HRB	INSTALLATION (lbs.)	PUSHOUT (lbs.)	TORQUE-OUT (in. lbs.)	PULL THRU (lbs.)	PULL THRU TEST BUSHING HOLE SIZE (in.)
TFH	440	9.2	.025" Aluminum	38	1300	75	10	683	.132
TFHS	440	6.2	.025" Aluminum	38	1200	75	8	527	.132
TFH	632	13	.025" Aluminum	41	2400	87	9	791	.158
TFHS	632	11	.025" Aluminum	41	2400	88	12	748	.158
TFH	832	19	.025" Aluminum	41	2100	94	14	943	.184
TFHS	832	17	.025" Aluminum	41	2200	94	17	963	.184
TFH	024/032	24	.025" Aluminum	38	2300	98	13	1033	.210
TFHS	024/032	21	.025" Aluminum	38	2500	101	12	1040	.210
TFH	440	9.2	.022" Steel	57	2800	85	10	684	.132
TFHS	440	6.2	.022" Steel	57	1500	80	9	531	.132
TFH	632	15	.022" Steel	57	2800	97	14	906	.158
TFHS	632	11	.022" Steel	57	2800	100	16	750	.158
TFH	832	21	.022" Steel	57	3500	111	23	1065	.184
TFHS	832	19	.022" Steel	57	2700	113	26	1109	.184
TFH	024/032	28	.022" Steel	57	3900	121	25	1214	.210
TFHS	024/032	24	.022" Steel	57	3200	112	23	1184	.210

fh-thfe-studs-metric

TYPE	THREAD CODE	REC. NUT TIGHTENING TORQUE (N•m)	TEST SHEET THICKNESS & MATERIAL	SHEET HARDNESS HRB	INSTALLATION (kN)	PUSHOUT (N)	TORQUE-OUT (N•m)	TENSILE STRENGTH (kN)	PULL THRU (kN)	PULL THRU TEST BUSHING HOLE SIZE (mm)
THFE	M6	9	0.8 mm Aluminum	38	39.2	550	7.3	18.1	13	8.3
THFE	M8	27	0.8 mm Aluminum	44	56	582	12.2	32.9	27.8	10.3
THFE	M6	10	0.8 mm Cold-rolled Steel	47	60.1	886	13.4	18.1	14.3	8.3
THFE	M8	27	0.8 mm Cold-rolled Steel	47	71.2	881	13.1	32.9	28.1	10.3

fh-thfe-studs-unified

TYPE	THREAD CODE	REC. NUT TIGHTENING TORQUE (ft. lbs.)	TEST SHEET THICKNESS & MATERIAL	SHEET HARDNESS HRB	INSTALLATION (lbs.)	PUSHOUT (lbs.)	TORQUE-OUT (in. lbs.)	TENSILE STRENGTH (lbs.)	PULL THRU (lbs.)	TEST BUSHING HOLE SIZE FOR PULL THRU TESTS (in.)
THFE	0420	8.1	.031" Aluminum	35	8800	116	71	3820	3249	.340
THFE	0518	18	.031" Aluminum	44	11700	131	103	6280	5701	0.402
THFE	0420	8.5	.031" Cold-rolled Steel	47	13500	197	116	3820	3388	.340
THFE	0518	18	.031" Cold-rolled Steel	47	16000	187	124	6280	5772	.402

fh-tp4-pins-metric

TYPE	PIN DIA. CODE	TEST SHEET MATERIAL	INSTALLATION (kN)	PUSHOUT (N)
TP4	3MM	300 Series Stainless Steel	35	1556
TP4	4MM	300 Series Stainless Steel	45	2335
TP4	5MM	300 Series Stainless Steel	54	2535
TP4	6MM	300 Series Stainless Steel	60	2891

fh-tp4-pins-unified

TYPE	PIN DIA. CODE	TEST SHEET MATERIAL	INSTALLATION (lbs.)	PUSHOUT (lbs.)
TP4	125	300 Series Stainless Steel	8000	350
TP4	187	300 Series Stainless Steel	12000	570
TP4	250	300 Series Stainless Steel	14000	650

fh-tps-pins-metric

TYPE	PIN DIA. CODE	TEST SHEET MATERIAL	SHEET HARDNESS HRB	INSTALLATION (kN)	PUSHOUT (kN)
TPS	3MM	Aluminum	22	12	0.56
TPS	3MM	Steel	65	22	0.98
TPS	4MM	Aluminum	19	22	0.89
TPS	4MM	Steel	66	26.4	1.54
TPS	5MM	Aluminum	18	28.6	1.01
TPS	5MM	Steel	60	35.2	1.76
TPS	6MM	Aluminum	18	30.8	1.1
TPS	6MM	Steel	62	39.6	2.1

fh-tps-pins-unified

TYPE	PIN DIA. CODE	TEST SHEET MATERIAL	SHEET HARDNESS HRB	INSTALLATION (lbs.)	PUSHOUT (lbs.)
TPS	125	Aluminum	20	4500	150
TPS	125	Steel	62	6500	250
TPS	187	Aluminum	18	6500	230
TPS	187	Steel	60	8000	400
TPS	250	Aluminum	18	7000	270
TPS	250	Steel	62	9000	500

fh-tpxs-pins-metric

TYPE	PIN DIA. CODE	TEST SHEET MATERIAL	SHEET HARDNESS HRB	INSTALLATION (kN)	PUSHOUT (kN)
TPXS	3MM	Aluminum	22	12	0.56
TPXS	3MM	Steel	65	22	0.98

Distributor	Quantity	Contact	Phone	Address	Locations

FH-094-5ZC

FH-094-5ZC

全站搜索

您想了解哪些？

FH-094-5ZC

FH-094-5ZC

Specifications

Installation & Performance Data

Inventory

全站搜索

您想了解哪些？